Patch Management
looping until patching completes. If the test passes, Sentriant AG allows the endpoint access to the
network.
NOTE
SMS patch management works with agent-based testing only.
NOTE
Endpoints must be identified in SMS and have the SMS client installed.
Sentriant AG Setup
To set up Sentriant AG for use with SMS:
1 Install and configure Sentriant AG (see the Sentriant AG Installation guide).
2 Log into the Sentriant AG user interface.
3 Add the following IP addresses to the Sentriant AG home window>>System
configuration>>Quarantine/guest resources area:
a SMS server IP address
b Domain Controllers IP addresses and authentication ports
Learning More About SMS
The following links provide additional information about SMS:
Microsoft SMS home page
●
http://www.microsoft.com/smserver/
SMS overview
●
http://www.microsoft.com/smserver/evaluation/default.asp
Available SMS documentation
●
http://www.microsoft.com/smserver/techinfo/productdoc/default.asp
Pre-requisites to using SMS
●
http://www.microsoft.com/technet/itsolutions/techguide/msm/swdist/pmsms/2003/
pmsms031.mspx#XSLTsection126121120120
Concepts, planning, and deployment guide
●
http://www.microsoft.com/resources/documentation/sms/2003/all/cpdg/en-us/default.mspx
366
Sentriant AG Software Users Guide, Version 5.3