Table of Contents
Advertisement
Modifying Policies and Rules
Changing Rule Parameters
Rule parameters can be changed either during the rule creating process or after the rule is saved.
During the rule creating process in the Rule Wizard, use the Back button to back up and make
●
changes to previous parameters.
To add, modify or delete parameters in a saved rule, use the following procedures: (These
●
procedures modify an ACL rule. Use the same process for a CLEAR-Flow rule which uses the
parameters: "Match Conditions", "Actions [True Condition]" and "Action [False Condition])".
a In the Rule Editing and Viewing Panel, click the rule to be modified. The parameters are shown
in the Rule Properties Panel under the Rule Parameters tab as shown below
Adding parameters to a rule
a To add a new Match Condition, Action or Action Modifier, click the Add icon
appropriate text box. The Add new parameter wizard dialog box opens. Follow the same
procedure as when creating a new rule (discussed
Modifying existing parameters in a rule
a To edit a parameter, select a parameter in either the Match Conditions, Actions, or Action
Modifiers text box. The Edit arguments of selected icon
parameter can be edited.
b Click the Edit... icon to display the Edit arguments dialog box that is specific to the match
condition or action being edited. For example, the Enter arguments for 'count': box is displayed
below.
46
on page
38)
is enabled when that particular
Extreme Networks Policy Manager (EPM) 1.2 User Guide
under the
Advertisement
Table of Contents
