Setting Graph Preferences - Extreme Networks ExtremeWare Enterprise Manager Installation And User Manual

S
ETTING
To change the graph settings used in this applet, click the Set Graph Preferences icon in
the toolbar.
The Graph Preferences window is displayed, as shown in Figure 10-6.
Use the tabs across the top of the window to select the type of setting you want to
change. Each tab displays a page with a group of related settings. When you have
changed any setting you want on a given page:
• Click Apply to put the changes into effect, but stay in the Graph Preferences
window so you can make changes on another page.
• Click OK to put the changes into effect and close the Graph Preferences window.
The Graph preferences settings are not persistent—if you move to another
Note:
ExtremeWare Enterprise Manager applet, the settings will return to the defaults.
Graph View (Figure 10-6) lets you change from 3D to 2D displays, and change the
values for the 3D depth, elevation and rotation.
Figure 10-6: Setting 3D graph preferences
E W E M
XTREME ARE NTERPRISE ANAGER
Determines whether the graph data is updated automatically at every
sampling interval. Click on the icon to toggle between continuous updates,
indicated by the bar with the red dot (representing a traveling data packet),
and the open palm, indicating that updates have been suspended.
Select this to bring up the graph preferences pop-up window. You can
change a variety of settings, such as graph and data colors, the sampling
interval, or the number of ports in a top N display.
G P
RAPH REFERENCES
I U G
NSTALLATION AND SER UIDE
S G P
ETTING RAPH REFERENCES
10-11