Table 45 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKZ41x) (continued)
Message ID
YKZ417E MSG SC=48
RC=48
YKZ418E MSG SC=48
RC=48
Multi-line Messages Output to SYSTSPRT
This section describes the multi-line messages that are output to SYSTSPRT.
In this section, character strings enclosed in angle brackets (< >) are variables.
YK8310I PRT
COPY GROUP : <cgid>
PREFIX : <prefix>
DAD-ID : <dad>
TYPE : <cgtype>
GROUP STATUS : <status>
SIMPLEX : <REPORT SUMMARY : simplexct>
MATCHING% : <match>
PENDING : <pendingct>
REVERSED% : <rev%>
DUPLEX : <duplexct>
ATTIME : <attime>
SUSPEND : <suspendall>
-STATUS : <attms>
OTHER : <otherct>
The results of REPORT(SUMMARY)are displayed.
<cgid>: Copy group ID
<prefix>: Prefix
<dad>: Copy group host device address domain ID
<cgtype>: Copy group type
<simplexct>: Number of copy pairs in SIMPLEX status
<pendingct>: Number of copy pairs in PENDING status
<duplexct>: Number of copy pairs in DUPLEX status
<suspendall>: Number of copy pairs in SUSPEND status
<otherct>: Number of copy pairs in other statuses
Message Text
This command is invalid for CA Copy
Groups linkaged with HyperSwap.
OPENMFUPDATE cannot use with
reverse-resync.
Explanation and Recommended Actions
systems with the following versions of the storage
system support function:
XP12000/XP10000 disk array
Version of the storage system support function:
X'11' or higher
XP24000/XP20000 disk array
Version of the storage system support function:
X'20' or higher
The command cannot be executed for Cnt Ac-S Z
copy groups with the HyperSwap attribute.
Execute the PPRC copy pair operation from TPC-R.
A resynchronization that reverses the copy direction
cannot be performed with the OPENMFUPDATE
parameter specified. (The OPENMFUPDATE
parameter is used to modify the Open/MF
Consistency attribute.)
Multi-line Messages Output to SYSTSPRT 159