HP XP P9500 Manual page 19

Table 1 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YK80x) (continued)
Message ID Message Text
YK8301I PRT CON time Not all volumes are in
'status'. action requested.
YK8302I PRT CON time Trying to cmd Copy
Group 'cgid'.
YK8303I PRT CON time Waiting for status
'status'.
YK8304I PRT CON time Copy Group is in
'status' status. Wait until
status has changed.
YK8305I PRT CON time Status ok.
YK8310I See "YK8310I PRT" (page
159).
YK831 1I CON REPORT SUMMARY:
COPY GROUP : cgid
TYPE : cgtype
DAD-ID : dad PREFIX : prefix
SIMPLEX : simplexct
PENDING : pendingct
DUPLEX : duplexct SUSPEND dad
: suspendallct OTHER :
otherct
Explanation and Recommended Actions
This is only displayed when the output
destination is SYSTSPRT.
The action identified by action will be executed because there is a
volume that is not in the status identified by status.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
The CLI command identified by cmd will be executed for the copy
group identified by cgid.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
BCM Monitor will wait until the copy group being monitored enters
the status identified by status.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
BCM Monitor will wait until the copy group status identified by
status changes to another status.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
The copy group entered the expected status.
time
Message output time
This is only displayed when the output
destination is SYSTSPRT.
N/A
This message indicates the results of REPORT(SUMMARY).
cgid
Copy group ID
cgtype
Copy group type
Copy group host device address domain ID
List of Messages 19