Hp Systems Insight Manager Support; Resolving Character And Line Feed Issues - HP ProLiant Lights Out-100 User Manual

LO100 checks the validity of the key/certificate pair after you reset the BMC.
You can also find these commands in /map1/firmware directory.
To successfully establish SSH/SSL connections after loading a key or certificate through the CLI or
the GUI, and after you click Apply, you must reset the BMC by choosing either of the following:
Issuing the following command from the CLI (/./-> cd map1 a"reset map 1")
Physically pulling AUX power

HP Systems Insight Manager support

HP Systems Insight Manager discovers LO100 to identify and launch LO100 and its license manager
to retrieve or deploy LO100. See your HP Systems Insight Manager user guide for more information
on using HP Systems Insight Manager with LO100.

Resolving character and line feed issues

HP recommends using similar operating systems to communicate between the CMS and your
applications or workstations. For example, if you are running a Linux CMS, run Linux on your
workstations, and use a Linux telnet client. Likewise, if you are running a Windows CMS, run
Windows on your workstations, and use a Windows Telnet client.
If you run multiple operating systems in your environment, an application limitation issue might
occur. For example, running Linux on your servers and using a Windows Telnet client or PuTTY
might cause an end of line character issue. If you experience issues, do one the following:
For a Windows Telnet client to Linux console redirection configuration, make sure Windows
Telnet sends a CR for the line feed. To set CR, use the following command for Windows Telnet:
unset crlf
For applications such as PuTTY with Linux redirection:
1. Click Connection>Telnet.
2. Clear Return key sends Telnet New Line instead of ^M.
52 Using LO100