HP XP P9500 Manual page 35

Table 4 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKD0x) (continued)
Message ID Message Text
YKD058E MSG Some pairs in this group do
SC=36 RC=48 not support Hitachi
TrueCopy™ Asynchronous
for Mainframe (TCA)
services.
YKD099I TSO YKDELETE command return
code=nnnn, reason
code=rrrr
Table 5 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKE0x)
Message ID Message Text
YKE000T TSO Supplied parameters invalid
RC=48
YKE001E MSG GOTO() not supplied
SC=48 RC=48
YKE001E TSO No message MSG() supplied
RC=48
YKE001E MSG No results STEM() supplied
SC=48 RC=48
YKE001E MSG TIMEOUT() not supplied
SC=48 RC=48
YKE001W MSG Timeout limit has expired,
SC=4 RC=4 waiting for group
copy-group to reach state
state.
YKE002E MSG Copy Group STEM(stem)
SC=48 RC=48 does not include trailing "."
YKE002E MSG DEVN() value invalid
SC=48
YKE002E TSO Messages MSG(stem) does
RC=48 not include trailing "."
Explanation and Recommended Actions
One or more devices in the HP XP 256 Disk Array storage system
do not support TCA copy groups.
Check that the command can be executed on this copy group, and
then re-execute the command.
The YKDELETE command terminated with the return code nnnn
and the reason code rrrr.
This message is always displayed to indicate the return code and
the reason code.
nnnn
Maximum among the severity codes returned
during command execution
Explanation and Recommended Actions
Invalid parameters are specified.
For details, see the reason code in the YKE099I message that will
appear after this message. For reason codes, see IKJPARS in the
TSO/E Programming Services.
Nothing is assigned to the GOTO parameter.
Nothing is assigned to the MSG parameter.
Nothing is assigned to the STEM parameter.
Nothing is assigned to the TIMEOUT parameter.
Processing is terminating because the timeout limit has expired.
Correct the timeout value or check that the status to be monitored
is correctly specified. Use the YKQUERY command to check the
status of the copy pairs. If there is a copy pair where a transition
has not taken place, the S-VOL of that copy pair might be ONLINE.
Make it OFFLINE and re-execute.
copy-group
Copy group ID
state
Status to be monitored
The last character of the STEM parameter is not a period.
stem
Stem name assigned to the STEM parameter
The value assigned to the DEVN parameter is invalid.
The last character of the MSG parameter is not a period.
stem
List of Messages 35