HP XP P9500 Manual page 88

Table 20 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKS2x) (continued)
Message ID
YKS285E MSG SC=48
RC=48
YKS290E MSG SC=44
RC=44 (result)
YKS298E MSG SC=44
RC=44 (detailed-info)
Table 21 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKT0x)
Message ID
YKT001E CON
YKT002E CON
88 Messages
Message Text
file-name is too long for a
filename.
YKVGET program failure for:vn
YKSTORE encountered an
unexpected error.
Message Text
Can't find SVCTABLE
Can't find IGCERROR
Explanation and Recommended Actions
file. Change the dataset format of
the configuration file into PS.
CANNOT GET DSSTATE, reason
code=nnnn
The dataset information cannot be
obtained, or the configuration file
is not assigned.
nnnn (decimal (base 10) number)
indicates a reason code
(maintenance information).
The file name identified by file-name is too long. The file
name must consist of 44 or fewer characters.
An attempt to acquire the variable vn failed with the result
value identified by result. This error can be caused by the
YKSTORE REXX subroutine's compiled REXX module being
directly executed.
Use the YKSTORE REXX subroutine instead of directly
executing the compiled REXX module.
An unexpected error has occurred. This error might have
occurred with another error.
If another error message was output at the same time as
this one, follow the instructions in that message to fix the
corresponding problem.
If no other error message was output, collect the following
materials and contact service representative:
The script from which this command was executed (not
necessary if this command was executed from the ISPF
panel).
The ISPF log (not necessary if this command was
executed from a script).
The configuration files operated on from the script or
ISPF panel (the copy group definition file, disk
configuration definition file, command device definition
file and route list definition file).
detailed-info
Detailed information to assist service
representative in resolving the problem
Explanation and Recommended Actions
The "SVCTABLE" search in the NUCLKUP macro failed.
The program abnormally terminates with user completion
code 996.
Contact technical support for assistance.
The "IGCERROR" search in the NUCLKUP macro failed.
The program abnormally terminates with user completion
code 996.
Contact technical support for assistance.