HP XP P9500 Manual page 168

Table 47 Details of Error Codes 20xx – 22xx (continued)
Error Error Details
Code
A copy pair could not be created for
20D7
one of the following reasons:
The S-VOL of the specified BC Z
copy pair is being used for
Compatible FlashCopy.
The S-VOL of the specified BC Z
copy pair is a TSE-VOL.
A copy pair with a C/T group ID
20E4
could not be created because the
P-VOL of the specified BC Z copy pair
meets both of the following
conditions:
The P-VOL is the S-VOL of a Cnt
Ac-J Z copy pair.
The P-VOL is being used by
another program product as the
P-VOL of a BC Z copy pair with a
C/T group ID.
A BC Z copy pair cannot be made
22F6
because the specified P-VOL is an
S-VOL for Compatible FlashCopy.
A BC Z copy pair cannot be made
22F7
because the specified S-VOL is either
a P-VOL or S-VOL for Compatible
FlashCopy.
A BC Z copy pair cannot be
22F9
resynchronized (by either
ReverseResync or QuickRestore)
because the volume is of a common
volume configuration consisting of a
P-VOL of BC Z and a P-VOL of
Compatible FlashCopy.
Table 48 Details of Error Codes 23xx
Error Error Details
Code
The command could not be executed
2301
because a BC Z program product has
not been installed.
The command could not be executed
2309
because an attempt was made to
make a copy pair that exceeded the
maximum number of BC Z copy pairs.
A BC Z copy pair status cannot be
2310
changed because the status of the
copy pair does not allow a status
transition. The reason might be one
of the following:
The combination of the request
command and the status of the
specified copy pair do not allow
the status transition. For
168 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z TCA
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Type of Error
BC Z Cnt Ac-S Z TCA
Output Not output
Output Not output
Output Not output
Cnt Ac-J Z CMD PATH
Cnt Ac-J Z CMD PATH
Others
Others