HP XP P9500 Manual page 93

Table 24 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKU0x) (continued)
Message ID
YKU003E MSG SC=48
RC=48
YKU004E MSG SC=48
RC=48
YKU005E MSG SC=48
RC=48
YKU008E MSG SC=48
YKU008E MSG SC=48
YKU009E MSG SC=48
YKU009E MSG SC=48
YKU010E TSO RC=40
YKU050E MSG SC=36
RC=48 (attribute-value)
YKU054E MSG SC=36
RC=48
YKU055E MSG SC=48
RC=48
YKU055E MSG SC=48
RC=48
YKU056E MSG SC=48
RC=48
YKU057E MSG SC=36
RC=48
Message Text
SVOL(PROTECT|PERMIT) option
required
ATTIME Specification is before
current time.
ATTIME Specification is more
than 45.5 days into the future.
DEVN() not valid hex
GENID() not valid hex
Specify ATTIME() and DEVN()
parm exclusively
Specify ATTIME() and VOLUNIT
parm exclusively
REXX failure return code=nnnn
starting with variable name
Invalid Copy Group attribute
name
ATTIME parameter invalid for CA
Copy Group
Specify PURGE and DEVN
parameter exclusively for CAJ
Copy Group
Specify PURGE and VOLUNIT
parameter exclusively for CAJ
Copy Group
DRAIN parameter cannot be
specified for CAJ Copy Group
ATTIME and CANCEL parameters
are invalid for CAJ Copy Group
Explanation and Recommended Actions
Time value assigned to the ATTIME
parameter
Either PROTECT or PERMIT must be specified for the
SVOL parameter.
The time assigned to the ATTIME parameter is earlier
than the present time.
The time assigned to the ATTIME parameter is more
than 65,535 minutes (45.5 days) past the present time.
The value specified in the DEVN parameter is not in
hexadecimal format.
The value specified in the GENID parameter is not in
hexadecimal format.
You cannot specify the ATTIME parameter and the
DEVN parameter at the same time.
You cannot specify the ATTIME parameter and the
VOLUNIT parameter at the same time.
Access to the REXX variable identified by name failed.
For details about the return code, see IKJCT441 in the
TSO/E Programming Services.
nnnn
Error code returned upon REXX
access
The specified copy group attribute value is invalid for
this command.
Correct the value and then re-execute the command.
name
REXX variable name
attribute-value
REXX variable value
The YKSUSPND command with the ATTIME parameter
specified was executed on a Cnt Ac-S Z copy group.
This parameter is invalid on Cnt Ac-S Z copy groups.
Re-execute the YKSUSPND command without specifying
the ATTIME parameter.
The PURGE and DEVN parameters cannot be specified
simultaneously for a Cnt Ac-J Z copy group.
The PURGE and VOLUNIT parameters cannot be
specified simultaneously for a Cnt Ac-J Z copy group.
The DRAIN parameter cannot be specified for a Cnt
Ac-J Z copy group.
The YKSUSPND command was executed on a Cnt Ac-J
Z copy group with the ATTIME parameter or CANCEL
List of Messages 93