HP XP P9500 Manual page 97

Table 27 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKX0x)
Message ID
YKX000T TSO
YKX001E TSO
YKX001E MSG SC=48
YKX002E TSO
YKX010E TSO RC=40
YKX065W MSG SC=4
RC=0
YKX066E MSG SC=48
RC=48
YKX099I TSO
Message Text
Supplied parameters invalid
No message MSG() supplied
No serial# SN() supplied
Messages MSG(stem) does not
include trailing "."
REXX failure return code=nnnn
starting with variable name
Storage system serial-number
Command Device Definition
Failed.
(APID=apid
Necessary Route List is not found.
YKBLDCMD command return
code=nnnn, reason code=rrrr
Explanation and Recommended Actions
Invalid parameters are specified.
For details, see the reason code in the YKX099I
message that will appear after this message. For reason
codes, see IKJPARS in the TSO/E Programming
Services.
Nothing is assigned to the MSG parameter.
Nothing is assigned to the SN parameter.
The last character of the MSG parameter is not a period.
stem
Stem name assigned to the MSG
parameter
Access to the REXX variable identified by name failed.
For details about the return code, see IKJCT441 in the
TSO/E Programming Services.
nnnn
Error code returned upon REXX
access
The command device definition for the storage system
identified by serial-number failed.
If multiple command devices are defined for the storage
system, processing continues.
Operate according to the I/O error messages issued
simultaneously.
serial-number
Serial number of the corresponding
storage system.
apid
APID of the command device that
failed to be defined
The route list to be processed was not found.
Check the ROUTE parameter, DAD parameter, route list
definition file, and command device definition file
specified in the YKLOAD command. Check that the
information corresponding to the storage system serial
number specified in the YKBLDCMD command is set.
The YKBLDCMD command terminated with the return
code nnnn and the reason code rrrr.
This message is always displayed to indicate the return
code and the reason code.
nnnn
Maximum among the severity codes
returned during command execution
List of Messages 97