HP XP P9500 Manual page 196

Table 57 Details of Error Codes 8Dxx (continued)
Error Error Details
Code
For details, see error code
2310.
The charging limit of the
program product was
exceeded.
The copy pair is in the Pending
status.
The copy pair is not in the Split
status.
The specified C/T group ID is
not registered.
The command could not be
8D17
executed because the BC Z, Cnt
Ac-S Z, or TCA program product
is not installed.
The command could not be
8D1A
executed because the volume
specified by the host command
parameter is the S-VOL.
A status cannot be changed
8D1B
because the status of the specified
copy pair does not match the
actual status.
A Cnt Ac-S Z or TCA copy pair
8D1C
cannot be made or resynchronized.
Possible reasons include one or
more of the following:
The P-VOL is a command
device.
The specified serial number of
the primary storage system or
SSID does not match the storage
system serial number or SSID of
the local CU.
The specified P-VOL does not
match the bootup volume.
The C/T group ID is incorrect.
The P-VOL has not been made
in the corresponding C/T
group.
The S-VOL is not in the Reverse
Resync status.
Either C/T group ID or the C/T
group timer type is incorrect.
A BC Z copy pair cannot be made
8D1D
or resynchronized. Possible reasons
include one or more of the
following:
The S-VOL is online.
The status of the copy pair does
not allow the status transition.
196 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z
Output
Not Output
output
Not Output
output
Not Output
output
Output Not output
TCA Cnt Ac-J Z CMD
Not output
Not output
Not output
Not output
PATH Others