HP XP P9500 Manual page 83

Table 17 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKQ0x) (continued)
Message ID Message Text
YKQ026W MSG SC=8 Primary volume is offline. DEVN
RC=8 (pair-index) device#(SN,CU#,CCA#)
YKQ099I TSO YKQUERY command return
code=nnnn, reason code=rrrr
Table 18 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKR0x)
Message ID Message Text
YKR000T TSO RC=48 Supplied parameters invalid
Explanation and Recommended Actions
CCA#
Command control address number
If the device cannot be identified, ** is
displayed.
pair-index
See the pair index description in the
explanation of the YKE003E message.
The volume serial number of the P-VOL cannot be obtained
because the P-VOL is offline.
Check that the copy group indicates the correct volumes
and is not being used for other purposes, make the P-VOL
online, and then re-execute the YKQUERY command.
device#
Device number
If the device cannot be identified, ****
is displayed.
SN
Storage system serial number
If the device cannot be identified,
************ is displayed.
CU#
Control unit number
If the device cannot be identified, ** is
displayed.
CCA#
Command control address number
If the device cannot be identified, ** is
displayed.
pair-index
See the pair index description in the
explanation of the YKE003E message.
The YKQUERY command terminated with the return code
nnnn and the reason code rrrr.
This message is always displayed to indicate the return code
and the reason code.
nnnn
Maximum among the severity codes
returned during command execution
Explanation and Recommended Actions
Invalid parameters are specified.
List of Messages 83