HP XP P9500 Manual page 36

Table 5 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKE0x) (continued)
Message ID
YKE002E MSG
SC=48 RC=48
YKE003E MSG
SC=48 RC=48
YKE003E MSG
SC=8 RC=8
YKE008E MSG
SC=48
YKE010E TSO
RC=40
YKE099I TSO
Table 6 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKF0x)
Message ID
YKF000T TSO
RC=48
YKF001E TSO
RC=48
36 Messages
Message Text
TIMEOUT() value invalid
GOTO value is invalid.
Unexpected transition of
group copy-group pair index
to state state.
DEVN() not valid hex
REXX failure return
code=nnnn starting with
variable name
YKEWAIT command return
code=nnnn, reason
code=rrrr
Message Text
Supplied parameters invalid
No message MSG() supplied
Explanation and Recommended Actions
Stem name assigned to the MSG parameter
The value assigned to the TIMEOUT parameter is invalid.
The value assigned to the GOTO parameter is invalid.
For the GOTO parameter, specify the DUPLEX, SUSPEND, SIMPLEX,
SUSPVS, HOLD, or SWAPPING option.
The copy pair in the copy group entered an unexpected status.
Check that the status to be monitored is correctly specified.
copy-group
Copy group ID
index
Pair index
Before version 2.0: Copy pair number
Version 2.0 or later: Copy group number and copy pair number
For details about identifying a volume with the copy group number
and the copy pair number, see
Processed" (page 163).
state
The status after the transition
The value specified in the DEVN parameter is not in hexadecimal
format.
Access to the REXX variable identified by name failed.
For details about the return code, see IKJCT441 in the TSO/E
Programming Services.
nnnn
Error code returned upon REXX access
The YKEWAIT command terminated with the return code nnnn and
the reason code rrrr.
This message is always displayed to indicate the return code and
the reason code.
nnnn
Maximum among the severity codes returned
during command execution
Explanation and Recommended Actions
Invalid parameters are specified.
For details, see the reason code in the YKF099I message that will
appear after this message. For reason codes, see IKJPARS in the
TSO/E Programming Services.
Nothing is assigned to the MSG parameter.
"Identifying the Volume to Be