HP XP P9500 Manual page 211

Table 60 Details of Error Codes C1xx (continued)
Error Error Details
Code
A copy pair cannot be suspended
C194
because the S-VOL status is being
changed.
A copy pair cannot be suspended
C195
because the specified copy pair is
already in the suspend status.
The command cannot be executed
C198
because there is no copy pair that
can be suspended in the group.
The copy pair cannot be
C199
suspended. The reason might be
one of the following:
The status of the bootup volume
is being changed.
There is a copy pair in the
group that has a status that is
being changed.
A Cnt Ac-S Z or TCA copy pair
C1BE
status cannot be changed because
the storage system is being turned
on.
Table 61 Details of Error Codes C2xx
Error Error Details
Code
A copy pair cannot be made
C211
because the specified copy pair is
already in the DUPLEX status.
The command cannot be executed
C213
because the serial number or SSID
of the primary storage system in
the parameter does not match the
actual serial number or SSID of the
primary storage system.
The command cannot be executed
C214
because the serial number or SSID
of the secondary storage system in
the parameter is different from the
one already registered with the
path (including ones without a
path).
A copy pair cannot be made
C215
because the specified S-VOL is in
use by another copy pair.
A copy pair cannot be
C21A
resynchronized because the
specified copy pair is not in the
suspend status.
A copy pair cannot be dissolved
C22A
because the status of the specified
volume is SIMPLEX.
Type of Error
BC Z Cnt Ac-S Z
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Type of Error
BC Z Cnt Ac-S Z
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
Not Output
output
TCA Cnt Ac-J Z CMD
Not output
Not output
Not output
Not output
Not output
TCA Cnt Ac-J Z CMD
Not output
Not output
Not output
Not output
Not output
Not output
Details of Error Codes
PATH Others
PATH Others
21 1