HP XP P9500 Manual page 174

Table 48 Details of Error Codes 23xx (continued)
Error Error Details
Code
The command could not be executed
23F5
because the ATTIME suspend time is
already set. To change the
configuration of the copy group
definition file, first cancel ATTIME
suspension.
A BC Z copy pair status cannot be
23FF
changed because the specified BC Z
copy pair status does not allow the
status to be changed.
Table 49 Details of Error Codes 36xx
Error Error Details
Code
Registration to EXCTG has failed
3613
because the specified arbitration
command device is not an
arbitration command device.
Registration to EXCTG has failed.
3614
The reason might be one of the
following:
The specified arbitration
command device is not defined.
The specified arbitration
command device is blocked.
Registration to EXCTG has failed
3616
because the journal group to be
registered is also subject to deletion
from EXCTG.
Registration to EXCTG has failed
3617
because the status is currently being
changed.
Registration to EXCTG has failed
3618
because M-JNL groups and R-JNL
groups co-exist within the EXCTG.
Registration to EXCTG has failed
3621
because the number of journal
groups exceeded the maximum
number that can be assigned to the
specified arbitration command
device. Retry the operation using
another arbitration command device.
Registration to EXCTG has failed due
3640
to a temporary path failure. Retry
the operation.
The EXCTG cannot be registered
3641
because the specified EXCTG ID,
journal group number, and mirror
ID are invalid.
174 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z TCA
Output Not output
Output Not output
Type of Error
BC Z Cnt Ac-S Z TCA
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Cnt Ac-J Z CMD PATH
Cnt Ac-J Z CMD PATH
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Others
Others