HP XP P9500 Manual page 45

Hp p9000 for business continuity manager software messages
Hide thumbs Also See for XP P9500:
Table of Contents

Advertisement

Table 8 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKG2x) (continued)
Message ID
Message Text
YKG277E MSG
name element missing.
SC=36 RC=36
(file:rec#)
YKG285E MSG
Serial Number HDASN is
SC=36 RC=36
required, but Serial Number
(file:rec#)
DDSN is found.
YKG286E MSG
Specify the local DAD ID of
SC=36 RC=36
the primary site for the
(file:rec#)
DAD() parameter.
YKG290E MSG
YKVGET program failure for:
SC=44 RC=44
vn
(result)
YKG295E MSG
The element stack was
SC=44 RC=44
overflowed.
(file:rec#)
Explanation and Recommended Actions
Number of the line in the file identified by file
where the error was detected
The XML element name is missing.
Correct the specification on the line with the line number identified
by rec# in the file identified by file.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
The disk device element's SerialNum must be the same as the
SerialNum value (HDASN) of the disk configuration element, but
DDSN is defined for this value.
Correct the specification on the line with the line number identified
by rec# in the file identified by file.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
A device address domain ID created by a remote scan or NG scan
is specified.
Specify the local device address domain ID of the primary site in
the DAD parameter. For details about the NG scan, see the HP
P9000 for Business Continuity Manager Software Reference Guide.
file
Name of the XML file where the error was
detected
rec#
Number of the line where the error was detected
in the file identified by file
An attempt to acquire the variable vn failed with the result value
identified by result. This error can be caused by an invalid value
being specified for the STEM parameter.
The internal routine encountered a shortage of work space.
Contact technical support for assistance.
file
Name of the XML file where the error was
detected
rec#
Number of the line in the file identified by file
where the error was detected
List of Messages
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

P9000 for business continuity manager 6.6.1

Table of Contents