HP XP P9500 Manual page 173

Table 48 Details of Error Codes 23xx (continued)
Error Error Details
Code
because the specified S-VOL is the
P-VOL of a Cnt Ac-S Z copy pair.
The command could not be executed
23A0
because the specified volume is
inconsistent with the volume that
received the command.
The specified volume is inconsistent
with the volume that received the
command.
A copy pair exists that shares the
specified C/T group ID and Cnt
Ac-S Z S-VOL, and the ATTIME
suspend function cannot be
executed.
The ATTIME suspend function
cannot be executed because the
P-VOL is a Non Gen'ed volume.
A BC Z copy pair cannot be made
23BB
because the LDEV security is set for
the specified S-VOL.
A BC Z copy pair cannot be deleted
23EF
because the specified BC Z copy pair
is in SUSPVS status.
The command could not be executed
23F1
because the specified C/T group ID
is out of the valid range.
The command cannot be executed.
23F2
The reason might be one of the
following:
The specified C/T group ID is not
registered.
The copy pair is in the SIMPLEX
status.
The command could not be executed
23F3
because the specified ATTIME
suspend time is in the past.
The command used to request that the
23F4
ATTIME suspend time information be
acquired could not be executed due
to the following reasons:
The command was issued to the
P-VOL.
The status of the copy pair is
SIMPLEX.
Make sure that the command is
properly issued and the copy group
definition file has been correctly
configured.
Type of Error
BC Z Cnt Ac-S Z TCA
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Cnt Ac-J Z CMD PATH
Details of Error Codes 173
Others