HP XP P9500 Manual page 107

Table 32 Business Continuity Manager Error Messages and Corresponding Troubleshooting Actions
(Message ID YKY3x) (continued)
Message ID
YKY362I CON
YKY500I SYS
YKY501E XML
YKY502E XML
Message Text
RECEIVED DATA SIZE
INVALID,DST=
connection-target-IP-address:
connection-target-port-number
RESULT OF UPDATING THE
CONFIGURATION FILE: result
Disk configuration definition
error-type error. file
Configuration file DELETE error.
file
Explanation and Recommended Actions
"LISTEN "
"RECV "
"SETSOCKOPT "
"SOCKET "
For details about the return code (RETCODE) for the
request type and the error number (ERRNO), see the
Communications Server IP API Guide.
The Business Continuity Manager agent received an
invalid size of data from connection-
target-IP-address:connection- target-port-number. The
corresponding receive processing will be stopped.
The size of data that can be received is 4,096 bytes.
Check, and, if necessary, revise the received data
size, and then re-execute the operation.
This message indicates whether the configuration file
was successfully updated.
If the configuration file failed to be updated, see the
other error message that was output with this one and
take appropriate action.
result
Indicates the result
SUCCESS: The update succeeded.
FAILURE: The update failed.
An error occurred in the disk configuration definition
file. See the error-type, and then remove the error.
After that, retry the operation from Replication
Manager.
error-type
ALLOCATE: An allocation error
Make sure that the file indicated by file exists.
EXECIO: An input error
Make sure that the file indicated by file has not
been broken.
format: An XML format error
Make sure that the XML description does not
contain an error.
file
Name of the disk configuration
definition file in which an error
occurred
During the update process for the configuration file,
an error occurred while attempt was being made to
delete the old configuration file. Remove the error,
and then take the following action:
List of Messages 107