HP XP P9500 Manual page 228

Table 65 Details of Error Codes EAxx (continued)
Error Error Details
Code
A Cnt Ac-J Z copy pair cannot be
EA36
suspended because the R-JNL
group is not in the Active status.
A Cnt Ac-J Z copy pair cannot be
EA3A
dissolved because the specified
S-VOL status is being changed at
the moment.
A Cnt Ac-J Z copy pair
EA3B
resynchronization, which causes
a copy direction reversal, cannot
be made because the copy pair
is in the TRANS status.
A suspension that reverses the
EA3C
copy direction cannot be
performed for the Cnt Ac-J Z copy
pair because the specified S-VOL
belongs to the M-JNL group.
A Cnt Ac-J Z copy pair cannot be
EA40
made because the charging limit
of the MCU program product has
been exceeded.
A Cnt Ac-J Z copy pair cannot be
EA41
made because the charging limit
of the RCU program product has
been exceeded.
The Cnt Ac-J Z copy pair cannot
EA4D
be suspended because it is a
delta resync pair.
The status cannot be changed
EA89
from error status to the delta
resync preparatory status,
because the specified P-VOL is not
in HOLDER status.
A copy pair cannot be created
EA95
because the pool of the THP Z
volume specified for the P-VOL of
a Cnt Ac-J Z copy pair is being
initialized.
The Cnt Ac-J Z copy pair cannot
EAA0
be operated for each EXCTG
because of the following reasons:
The JNLG specified in the copy
group is not registered in the
EXCTG.
There is a copy pair with a
status that is TRANS.
A Cnt Ac-J Z copy pair cannot be
EAA1
made because the charging limit
of TCA in the MCU has been
exceeded. Check the license
capacity of this and all related
program products.
228 Storage System Sense Byte Information
Type of Error
BC Z Cnt Ac-S Z
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
Not output
TCA Cnt Ac-J Z CMD
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
Output Not output
PATH Others