Configuring The Ws Scan Operating Environment; Overview; Configuring The Basic Settings For The Ws Scan Transmission - Konica Minolta bizhub C3350 User Manual

2.5

Configuring the WS Scan operating environment

2.5 Configuring the WS Scan operating environment

Overview

The WS scan transmission is a function that transmits original data scanned on this machine to the computer
on the network on the computer loaded with Windows Vista or later (Windows Vista/7/8/8.1/Server
2008/Server 2008 R2/Server 2012/Server 2012 R2).
The computer uses the Web service function of Windows to automatically detect this machine connected to
the network and smoothly install this function as a Web service scanner.
HTTP is used for communication between this machine and the computer. Use SSL to encrypt a communi-
cation between this machine and the computer; you can send a file more securely.
When using the WS scan transmission, follow the below procedure to configure the settings.
1
Configure settings for connecting to the network such as setting of the IP address of this machine
% For details on configuring the setting, refer to page 1-3.
2

Configuring the basic settings for the WS scan transmission

% For details on configuring the setting, refer to page 2-13.
3
Set the following options according to your environment
Purpose
Communicate with the computer using SSL
d
Reference
For details on how to configure settings on the computer, refer to [User's Guide: Scan Functions].
Configuring the basic settings for the WS scan transmission
Enable the scan using the Web service. In addition, configure settings used to detect this machine using the
Web service, information for this machine as a scanner, and the method to connect to this machine.
1
In the administrator mode, select [Network] - [Web Service Settings] - [Common Settings], then config-
ure the following settings.
Settings
[Friendly Name]
2
In the administrator mode, select [Network] - [Web Service Settings] - [Scanner Settings], then config-
ure the following settings.
Settings
[Scan Function]
[Scanner Name]
[Scanner Location]
[Scanner Information]
[Connection Timeout]
[Applied Functions]
Description
Enter the name of this machine to be displayed when this machine is searched
for using the Web service through a computer (using up to 127 bytes).
Description
Select [Enable] to use the WS scan transmission function.
[Enable] is specified by default.
Enter the name of this machine when using it as the WS scanner (using up to
127 bytes).
If necessary, enter the installation location of the scanner (using up to 127
bytes).
If necessary, enter the scanner information (using up to 127 bytes).
Change the time-out time to limit a communication with the computer if nec-
essary.
[120] sec. is specified by default.
2
Reference
page 2-14
2-13