For Network Connection (Web Service Print) - Konica Minolta bizhub Press 1250P Additional Information

3
3.2.3

For Network Connection (Web Service Print)

In Windows 8/Server 2012, printers supporting the Web service print function on the network can be located
and installed.
d
Reference
To install a different printer driver in the computer where one has already been installed, you must uninstall
the whole package of the currently installed printer driver. For details, refer to page 3-12 of this guide.
Settings of this machine
To use the Web service print, you must configure the network settings for the machine in advance.
Items to be configured
IP Address
Web Service Settings
d
Reference
For details on the network settings for this machine, refer to "User's Guide - POD Administrator's Reference".
Making the printer driver known from the Network window
To use Web service print in Windows 8/Server 2012, install the printer driver before making it known to the
computer with plug and play.
0
Installing the driver to Windows 8/Server 2012 based computers requires the administrator authority.
1
Install the printer driver for this machine.
% Install the printer driver using the installer or Add Printer Wizard.
The printer driver can be installed in any port.
For details, refer to "User's Guide - Printer" or page 3-4 of this guide.
2
Turn on the power of the machine while it is connected to the network.
Since the printer is searched for, be sure to connect this machine to the network.
3
To use the Web service print, check that [Network discovery] is enabled in [Network and Sharing Cent-
er] - [Change advanced sharing settings] on the computer.
4
Open the [Network] window.
% Click the [Network and Internet] category on the [control panel], and also click [View network com-
puters and devices].
Connected computers and devices are detected.
5
Right click the device name of this machine and select [Install]. On the toolbar, click [Network] - [Add
Devices and Printers]. In the window displayed, select the device name of this machine and then click
[Next].
% To check the device name, select [Network Setting] - [Controller NIC Setting] - [Web Service Setting]
- [Print Setting] in [Administrator Settings] of this machine. In the default setting, the last six charac-
ters of [printer name] correspond to the low-order three bytes of the MAC address.
To check the MAC address, select [Configuration Page].
The printer driver for this machine is detected and this machine is ready to print.
6
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Devic-
es and Printers] window.
Reference
-
If the printer driver is not correctly installed, the driver must be updated using [Update Driver...]. For
details, refer to page 3-11 of this guide.
3-10
Manual Installation Using the Add Printer Wizard (Windows 8/Server 2012)
Description
In [TCP/IP Setting] of this machine, specify the IP address.
In [Web Service Setting] for the machine, enable the print function.
bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
3.2