Setting up network printing
4.2
Setting the IP address for this machine
Use this machine's control panel to assign an IP address to this machine.
Reminder
When specifying network settings, follow the instructions of the network administrator.
1
Press the [Utility/Counter] key in this machine's control panel, touch [Administrator Settings], and then
enter the administrator password.
–
The administrator password is required to enter Administrator mode. Ask the administrator of this
machine for the administrator password.
2
Touch [Network Settings], then [TCP/IP Settings].
3
Touch [ON].
4
Touch [IP Settings].
5
Touch [Manual Input] under "IP Application Method".
6
Specify settings for the following:
–
IP Address: Specify the IP address of this machine.
–
Subnet Mask: Specify the subnet mask for the network to which you are connecting.
–
Default Gateway: Specify the default gateway address for the network to which you are connecting.
7
Touch [OK].
8
To apply the settings, restart this machine (turn the main power off, then on again).
Turn this machine back on to apply the IP address.
bizhub C650/C550/C451 (FE3)
4
4-5