Description Of Setting Item And Model-Dependent - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+
The following is a list of user setting items not included in the setting
menu. They are not cleared by Selc Type Init of the Setup Menu on the
panel.
Table 1-38. User Setting Items
Setting item Setting
Printer Name 32-byte character
command string
MFG of Device ID 32-byte character
sting
MDL of Device ID 32-byte character
string
DES of Device ID 32-byte character
sting
CID of Device ID 32-byte character
string
Name of Mailbin 1 24 bytes of data
Name of Mailbin 2 24 bytes of data
Name of Mailbin 3 24 bytes of data
Name of Mailbin 4 24 bytes of data
Name of Mailbin 5 24 bytes of data
Name of Mailbin 6 24 bytes of data
Name of Mailbin 7 24 bytes of data
Name of Mailbin 8 24 bytes of data
Name of Mailbin 9 24 bytes of data
Name of Mailbin 10 24 bytes of data
Rev.B
Initial value Setting method
Product Name EJL, PrinterName
(undefined) EJL
(undefined) EJL
(undefined) EJL
(undefined) EJL
Null EJL, MIB
Null EJL, MIB
Null EJL, MIB
Null EJL, MIB
Null EJL, MIB
Null EJL, MIB
Null EJL, MIB
Null EJL, MIB
Null EJL, MIB
Null EJL, MIB

1.4.2.3 Description of Setting Item and Model-dependent

Described below are model-dependent specification details of the
setting items for this printer.
TRAY MENU/MP TRAY SIZE

The paper sizes which can be set are limited and MON, C10, DL
and C5 cannot be set.

Although the MP tray has a paper width sensor, it cannot
confirm the paper size. Therefore, the program refers to MP
Tray Size set on the panel as usual.

When "Paper Set ssss ttt" has occured and then is cleared, MP
Tray Size changes to ttt if the specified size ttt matches the
result of the paper width sensor differs from neither ttt nor MP
Tray Size, it will be controlled as unfixed size, causing single-
size printing to be slow and duplex printing to be invalid.
Therefore, the paper width guide must be set in place.
TRAY MENU/ENV TRAY SIZE

The paper sizes which can be set are limited and MON, C10, DL
and C5 only are supported.

The ENV tray also has a paper width sensor and its processing
is the same as for the MP tray.
TRAY MENU/MP TYPE, LC1 TYPE LC5 TYPE

The type of paper placed on each paper feed unit is set.

When Paper Source = Auto, used to select a unit also matching
the paper type, from the paper feed units which match the
specified paper size.
CHAPTER 1 Product Description
35