EPSON EPL-N4000/EPL-N4000+
11. Reinstall the Option Connector Bracket to the frame, and use one
screw to secure the Bracket.
12. Reconnect P403, P404, P406, and P408 to the MCU PWB.
13. Reinstall the docking clip to Tray 2, and use one screw to secure the
clip.
14. Reinstall the docking stud located at the lower right of the Tray, and
use a retaining clip to secure the stud.
15. Reinstall the MSI Support Assembly. ("MSI Support Assembly" on
page -166)
16. Reinstall the Rear Cover Assembly. ("Rear Cover Assembly" on
page -140)
17. Reinstall the Left Upper Cover Assembly.
18. Reinstall Tray 1 and Tray 2.
19. Reinstall the EP Cartridge. ("EP Cartridge (Toner Cartridge)" on
page -192)
20. Reinstall the Duplex Unit, if one was installed.
Rev.B
Chapter 4
Disassembly and Assembly
149