Skewed Image - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+

3.4.12 Skewed Image

Table 3-54. Skewed Image
Step Actions and Questions
1 PAPER FEED INSPECTION
Are the paper cassettes installed
correctly, and is the paper correctly
loaded into each cassette?
2 PAPER PATH INSPECTION
Inspect the paper path, between the
feed tray and the exit tray, for
contamination or obstructions.
Is the paper path free of
obstructions?
Rev.B


Problem
The printed image is not parallel with
the sides of the page.
SUSPECT COMPONENTS
The following components are associ-
ated with this specific problem. One
or more of these components may
have failed partially or completely. If
you cannot isolate the problem using
this FIP, replace each component
listed below, one at a time, until the
problem disappears.
•ROS Assembly
Yes No
Go to step 2 Reload the
paper and
reinstall the
cassettes.
Go to step 3 Remove
obstructions
or
contamination
from the
paper path.
Table 3-55. Skewed Image
Step Actions and Questions
3 FEED, NUDGER, AND RETARD
ROLL REPLACEMENT
Replace the Feed Roll, Nudger Roll,
and Retard Roll for the Feeder having
the skew problem.
Is the image still skewed?
4 REGISTRATION ROLL
REPLACEMENT
Replace the Registration Roll.
Is the image still skewed?
Chapter 3 Troubleshooting
Yes No
Go to step 4 Problem
solved
Replace the Problem
EP solved
Cartridge
127