Epson EPL-N4000 Service Manual page 43

EPSON EPL-N4000/EPL-N4000+
Table 1-30. Printer Setting
Menu Item
Tray Menu • MP Mode • Normal, Last (Added in EPL-N4000+)
*1
• MP Tray Size • A4
• C5 , DL, C10, MON
*4
• ENV Tray size
• A4, A3, A5, B4
*5
• LC1 Size
• A4, A3, B4
*5
• LC2 Size
• A4, A3, B4
*8
• LC3 Size
• A4, LT, EXE
*8
• LC4 Size
• A4, LT, EXE
*8
• LC5 Size
• Plain , Preprinted, Letterhead, Prepunched,
*1
• MP Type
• Plain
*9
• ENV Tray
• Plain , Preprinted, Letterhead, Prepunched,
• LC1 Type
• Plain, Preprinted, Letterhead Prepunched,
• LC2 Type
• Plain , Preprinted, Letterhead Prepunched,
*10
• LC3 Type
• Plain , Preprinted, Letterhead Prepunched,
*10
• LC4 Type
• Plain , Preprinted, Letterhead Prepunched,
*10
• LC5 Type
Config • RITech • On , Off
Menu
• Toner Save • Off, On
• Density • 3, 4, 5, 1, 2
• Top Offset • 0.0 , -150.0 to 150.0 mm step 0.5 mm
• Left offset • 0.0 , -150.0 to 150.0 mm step 0.5 mm
*11
• T offset B • 0.0, -150.0 to 150.0 mm step 0.5 mm
*11
• L offset B • 0.0, -150.0 to 150.0 mm step 0.5 mm
• Off, On
• Size Ignore
• Auto Cont • Off, On
• Page Protect • Auto, On
• Image Optimum • Auto, Off, On
Rev.B
Value
*2
, A3, A5, B4, LT, B5, B, HLT, LGL,GLT,
GLG, EXE, F4, IB5
*6 *7
, LT, LGL , GLG, B, EXE
*6 *7
, LT, LGL , GLG, B, EXE
*6 *7
, LT, LGL , GLG, B, EXE
*7 *6
, B5
*7 *6
, B5
Bond, Recycled, Color, Transparency, Labels
Bond, Recycled, Color, Transparency, Labels
Bond, Recycled, Color, Transparency, Labels
Bond, Recycled, Color, Transparency, Labels
Bond, Recycled, Color, Transparency, Labels
Bond, Recycled, Color, Transparency, Labels
NOTE: *1:Appears only when the MP tray is installed, and can then be
selected. The MP tray does not support the envelope size to
which the ENV tray corresponds.
*2: Factory default setting when the A4/LT configuration is A4.
*3: Factory default setting when the A4/LT configuration is LT.
*4: Appears only when the ENV tray is installed, and can then be
*7 *6
, B5
selected.
*7 *6
, B5
*5: Not displayed on the panel. Not printed on the status sheet.
*7 *6
, B5
Can be extracted with EJL and so forth.
*6: With the cassette size detect jumper setting as LGL and
EXE, LGL is detected when B4 or LGL paper is placed in the
cassette. EXE is detected when B5 or EXE paper is placed in it.
*7: With the cassette size detect jumper settings as B4 and B5,
B4 is detected when B4 or LGL paper is placed in the cassette.
B is detected when B5 or EXE paper is placed in it.
*8: Not displayed on the panel. Not printed on the status sheet.
Can be extracted with EJL and so forth only when the Large
Capacity Paper Unit is installed.
*9: Not displayed on the panel. Always Plain on this model.
Cannot be set with EJL, PJL and command.
10: Appears only when the Large Capacity Paper Unit is
installed, and can then be selected.
*11: Appears only when the Duplex Unit is installed.
CHAPTER 1 Product Description
29