Left Upper Cover Assembly; Removal - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+

4.2.39 Left Upper Cover Assembly

(See "Left Upper Cover Assembly" on page -272)

4.2.39.1 Removal

1. Remove the Rear Cover. ("Rear Cover Assembly" on page -140)
2. Open the Duplex Unit.
3. Open the Left Upper Cover.
When the Left Upper Cover is open, the BTR is
exposed. Do not touch the BRT. Grease and dirt on,
or physical damage to the BTR will effect print
quality.
4. Use a screwdriver blade to open the latch securing the Front Shaft
Hinge, and slide the Hinge out of the Cover Assembly. Do not slide
the Hinge completely out of the printer frame.
5. Use a screwdriver blade to open the latch securing the Rear Shaft
Hinge, and slide the Hinge out of the Cover Assembly. Do not slide
the Hinge completely out of the printer frame.
6. Pull the Left Upper Cover Assembly away from the printer frame.
7. Remove the two screws securing the two Cover Supports to the
frame, and remove the Cover.
Rev.B
Chapter 4
Figure 4-54. Removal of Left Upper Cover Assembly
Disassembly and Assembly
185