Registration Sensor; Installation - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+

4.2.43 Registration Sensor

(See "Registration" on page -271)

4.2.43.1 Installation

1. Open the Left Upper Cover.
2. Squeeze in all four Sensor latches while you pull the Sensor out of
the Registration Chute Assembly.
3. Disconnect J103 from the rear of the Sensor.
Figure 4-58. Removal of Registration Sensor
Rev.B
Chapter 4
4.2.43.2 Installation
1. Reconnect J103 to the Registration Sensor.
2. Insert the Sensor into the cutout in the Registration Chute
Assembly.
3. Press in on the Sensor unit it snaps into place.
4. Close the Left Upper Cover.
Disassembly and Assembly
190