Epson EPL-N4000 Service Manual page 140

EPSON EPL-N4000/EPL-N4000+
Table 3-53. Background
Step Actions and Questions
4 FUSER INSPECTION
1. Generate another Blank Test Print
and switch OFF printer power when
the print is halfway through the Fuser.
2. Open the Left Upper Cover.
3. Examine the paper areas before the
image enters the Fuser and after the
image exits the Fuser.
Is paper clean before it enters the
Fuser, but there is background on
the paper when it exits the Fuser?
Rev.B
Yes No
Replace the Go to Suspect
Fuser Components
Assembly.
Chapter 3 Troubleshooting
126