Registration Clutch; Removal; Installation - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+

4.2.38 Registration Clutch

(See "Registration" on page -271)

4.2.38.1 Removal

1. Remove the Rear Cover. ("Rear Cover Assembly" on page -140)
2. Disconnect P/J 200 from the Registration Clutch.
3. Remove the E clip securing the Registration Clutch to the
Registration Shaft.
4. Push out on the shaft latch as you slide the Clutch off of the shaft.
Figure 4-53. Removal of Registration Clutch
Rev.B
Chapter 4

4.2.38.2 Installation

1. Slide the Registration Clutch onto the shaft. The shaft latch snaps
the Clutch into place on the shaft.
2. Use an E clip to secure the Registration Clutch to the Registration
Shaft.
3. Reconnect P/J 200 from the Registration Clutch.
4. Reinstall the Rear Cover. ("Rear Cover Assembly" on page -140)
Disassembly and Assembly
184