Setting Items (Model-Dependent) (Only With Epl-5900) - Epson EPL-5900 Service Manual

EPSON EPL-5900/EPL-5900L

1.5.2.1 Setting Items (Model-dependent) (Only with EPL-5900)

Described below are model-dependent specification details of the setting items for
EPL-5900.
MP MODE
When the paper source setting is "Auto" or not specified, MP mode determines the
priority of the sources.
Normal: MP > LC (MP Tray has priority)
Last: LC > MP (Lower Cassette has priority)
TRAY ASSIGN
Tray Assign changes the assignment for the paper source select command (ESC&I#H).
Effective only for PCL mode.
Table 1-44. Tray Assign
The correspondence of
MP LC
the parameter #
4 1 4
4K 4 1
5S 8 1
PAPER TYPE
Specifies the paper type loaded in the MP Tray.
Normal: Normal paper
Thick W: Thick paper
Thick N: Thick and narrow paper like an envelop.
Transprnc: OHP sheets
Product Description
Notes
HP Laser Jet 4 compatible
HP Laser Jet 4000/5000/8000 compatible
HP Laser Jet 5Si compatible
MP TYPE, LC TYPE
Specifies the paper type for MP Tray or LC.
When "Paper Source = Auto", MP Type and LC Type are used to select a unit that
matches the paper type specified by the printer driver.
In a printer mode without such command, the same operation as when "Plain" is
selected is performed.
"Transpmcy" and "Label" cannot be set to LC1 Type. Other parameters are common to
MP Type.
The correspondence of "Paper Type" and "MP Type" setting and the printing media is
as follows:
Table 1-45. Paper Type, MP Type, and the Printing Media
Paper Type (Setup Menu)
Normal
Normal
Thick W
Thick N
Transprnc
PARALLEL I/F, USB I/F, AUX I/F
Only interfaces that are set to "On" by the panel setting can be used by the automatic
selection.
All interfaces are set to "On" at the factory default setting.
To use a fixed interface, set "On" only for the interface that to be used.
Changes to the interface setting will be effective after the Reset All is performed or the
power is turned on again.
If "Off" is set to all interfaces, they are reset to "On" after the Reset All is performed or
the power is turned on again. (It is not allowed to set "Off" to all interfaces.)
Control Panel
Revision B
MP Type Printing Media
OHP OHP
Other than OHP Normal paper
Any Thick paper
Any Postcard/Envelop
Any OHP
43