EPSON EPL-N4000/EPL-N4000+
4.2.6 Rear Cover 1TM
(See "Rear, Left and Right Cover" on page -255)
4.2.6.1 Removal
1. Disconnect all option plugs from the Plug Jack located at the rear of
the printer.
2. Remove the two screws securing the Rear Cover 1TM to the printer
frame.
3. Lift up on the Cover and remove it from the printer frame.
Figure 4-13. Removal of Rear Cover 1TM
Rev.B
Chapter 4
4.2.6.2 Installation
1. Reinstall the Rear Cover 1TM by first hooking the bottom edge of
the Cover onto the frame, then pressing the top of the Cover against
the frame.
2. Use two screws to secure the Cover to the printer frame.
3. Reconnect the option plugs to the Plug Jack located at the rear of
the printer.
Disassembly and Assembly
143