Basic Specification; Controller Specification - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+

1.3 Basic Specification

1.3.1 Controller Specification

CPU


CPU: 64-bit RISC CPU VR4700 133MHz
RAM


RAM: SDRAM DIMMs adopted

64 MB RAM fitted as standard (SDRAM DIMM type. However,
8MB is used as a system area)


DIMM option: 8MB*, 16MB, 32MB, 64MB, 128MB (SDRAM type, 2
slots) Maximum
NOTE: * 8 MB is rarely distributed and therefore, this is not stated in
the catalog and specification.
ROM


Fonts: 2M bytes (mounted on main board)


Program: 4M bytes (mounted on flash ROM DIMM board)


Expansion ROM: 3 ROM DIMM slots (Can be mounted and
removed only when power is off)
Slot A: Adobe PS 3 kit or option fonts
Slot B: Adobe PS 3 kit or option fonts
Slot C: NLSP fonts
Only one Adobe PS 3 kit can be mounted
Rev.B
HOST INTERFACES


Host Interfaces:

Standard: Parallel IEEE 1284 compliant, bidirectional, B-type
connector. Compatibility, Nibble, ECP
Ethernet 10 BaseT/100BaseTX

Option: Type B I/F slot (1 slot)
PRINTER SETTING


By EJL, PJL, HTTP, SNMP and ENPC (EPL-N4000+)


Memory element EEPROM serial type 16KB
CONTROL PANEL


Control Panel:

Switch: 8 switches

LED: 6 LEDs

LCD: 20-character LCD
MOUNTING
Fixed on main unit
HDD OPTION


HDD option:IDE type. 4GB or 6GB (TBD). Dedicated format for
EPL-N4000. Required when finisher option is used.
Can be used only with software of EPL-N4000+.
Already formatted; no initialization required.
CHAPTER 1 Product Description
8