Host Interface Specification; Parallel Interface - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+

1.3.12 Host Interface Specification

EPL-N4000 has the following interfaces fitted as standard.


IEEE 1284 parallel interface


Ethernet interface


Option Type B slot
Figure 1-6. Interface Part
The following table shows which host interface configurations can be
used.
Table 1-21. Interface
Parallel I/F
I/F automatic selection
I/F fixed(parallel)
I/F fixed(Ethernet)
I/F fixed (AUX)
Note) O: Enable, X: Disable
Rev.B
Ethernet I/F Type-B I/F
O O
O X
X O
X X

1.3.12.1 Parallel Interface

Interface type:I


Operating mode: Compatibility, Nibble, ECP


Connector type:


Compatible plug: Amphenole or equivalent
The default device ID setting for this printer is as follows. The
information is shown below including line breaks, but the actual data is
a continuous character string, with no line break characters. The CMD
items are not in order. The CID, MODE and STATUS items are not
included. The DES item contents are MFG and MDL connected by a
space. XXXX mentions products name.


When Adobe PS 3 kit is not installed
MFG:EPSON;
CMD:PJL, ESCPL2, ESCP9,PRPXL24-01,PCL, HPGL2-01,
ESCPAGE-04;
MDL: XXXX;
CLS:RPINTER;
DES: EPSON XXXX;


When Adobe PS 3 kit is installed
MFG:EPSON;
CMD:PJL, ESCPL2, ESCP9,PRPXL24-01,PCL, HPGL2-01,
O
ESCPAGE-04,POSTSCRIPT;
X
MDL: XXXX;
X
CLS:RPINTER;
O
DES: EPSON XXXX;
CHAPTER 1 Product Description
IEEE 1284 bi-directional parallel interface
57RE-40360-830B(D7A)DDK or equivalent
19