Changes From Epl-N4000 To Epl-N4000 - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+

1.2 Changes from EPL-N4000 to EPL-N4000+

Here explains the changes from EPL-N400 to EPL-N4000+.
DIFFERENCE OF PANEL SETTING


"Printing Menu", "Device Menu" "ESC/PS Environment Menu" and
"ESC/Page Environment Menu"

"Start ,menu", "Initialization Menu" are erased

"Setting Initialization = All setting" in the "Initialization Menu" is
added as "Setting Initialization" of "Common Menu".

"One-touch" is added to "Printer Mode Menu"
DESIGNED FOR FINISHER AND STAPLE


The following are added to the panel settings.

Setup Menu/Stacker

Printing Menu/Staple

Printing Menu/Staple position

Support Menu/HDD Format

Support Menu/Adobe PS 3 kit HDD Init


The following are added to the printer message.

Finisher Error yyy

Can'tAdjustFnshrTray

Finisher N Full

Install Staple Crtg

Cover E Open
Rev.B

Cover F Open

Cover G Open

Cover H Open

Staple Cover Open

Finisher Not Connect

Stapler Supply

Can't Staple (Warning)

Staple Align (Warning)

Check Stapler (Warning)

Adobe PS 3 kit Hard Disk full

Maintenance Req 0001-0013


Following message is erased from the printer message

Optional device error
DESIGNED FOR ADOBE PS 3 KIT


The following is added to the printer messages.

Invalid Adobe PS 3 kit
MODIFIED ESC/PAGE


The following were added to the panel setting items.

PGI was added to ESC/Page Menu.

ESC/Page was added to IES.


The following commands were added.

Job clear (GS pcO)
CHAPTER 1 Product Description
5