EPSON EPL-N4000/EPL-N4000+
4.2.28 MSI Nudger Roll
(See "Upper Feeder Assembly" on page -267)
4.2.28.1 Removal
1. Remove MSI Feed Roll. ("MSI Feed Roll" on page -172)
2. Remove the E-clip securing the MSI Gate ("Upper Feeder
Assembly" on page -267) to the Nudger Shaft and remove the Gate.
3. Remove the E-clip securing the Nudger Roll to the Nudger Shaft
and slide the Nudger Roll off of the shaft.
Figure 4-42. Removal of MSI Nudger Roll
Rev.B
Chapter 4
4.2.28.2 Installation
1. Slide the Nudger Roll, forked end first, onto the Nudger Shaft,
making sure the forked end engages the pin at the end of the shaft.
2. Use an E-clip to secure the Nudger Roll to the Shaft.
3. Slide the MSI Gate onto the Shaft (see the illustration for correct
positioning of the Gate).
4. Use an E-clip to secure the Gate to the Shaft.
5. Reinstall the No-Paper Sensor Bracket onto the Feeder Assembly,
and use one screw to secure it to the Assembly.
6. Reinstall the MSI Feeder Assembly. ("MSI Feeder Assembly
(Manual Feeder)" on page -164)
Disassembly and Assembly
173