Setting Item Description - Epson EPL-N2700 Service Manual

EPSON EPL-N2700 / N2750
33.Not indicated on the panel. Not printed on the Status Sheet. Can be set and acquired
by EJL. Not open to users.
34.Indicated only when option font is installed to the optional ROM socket.
35.According to the selected font, the indication will be changed.
When rated pitch Scalable Font is selected, "Pitch" will be indicated.
When proportional Scalable Font is selected, "Height" will be indicated.
When Bitmap Font is selected, neither one is indicated.
36.When the jumper setting on the controller is A4, the default will be "64".
When the jumper setting on the controller is Letter, the default will be "60".
37.Indicated only when "GLMODE =GLlike".
38.Indicated only when optional PostScript 3 DIMM is installed.
39.When the jumper setting on the controller is A4, the default will be "66".
When the jumper setting on the controller is Letter, the default will be "62".
40.When the jumper setting on the controller is A4, the default will be "66".
When the jumper setting on the controller is Letter, the default will be "62".
41.When the jumper setting on the controller is A4, the default will be "67".
When the jumper setting on the controller is Letter, the default will be "63".
42.When the jumper setting on the controller is A4, the default will be "2".
When the jumper setting on the controller is Letter, the default will be "1".
43. Indicated only when Support Menu is valid by cache function at powering on and
HDD is installed.
44.Indicated only when PS3 module is installed.
45.Indicated only when Maintenance Menu is valid by cache function at powering on.
46.Indicated even though options are not installed. Counter will be cleared, too.
NOTE: Mode settings on the paper eject mechanism and interface
settings do not become valid until warm-boot or turning on
the printer again. Also, when you changed the mode on the
paper eject mechanism, the setting of paper eject selection
item indicated / not indicated will not become valid until
warm-boot or turning on the printer again.
When you removed the options, if the stored panel settings
and the real situation does not correspond, the stored
settings will be reset to the default settings.
Product Description Panel Operation
Revision B
45