Installation - Epson EPL-N4000 Service Manual

EPSON EPL-N4000/EPL-N4000+

4.2.39.2 Installation

1. Open the Duplex Unit.
When the Left Upper Cover is open, the BTR is
exposed. Do not touch the BRT. Grease and dirt on, or
physical damage to the BTR will effect print quality.
2. Reinstall the Left Upper Cover Assembly so the hinge openings in
the Cover arms line up with the hinge holes in the printer frame.
3. Slide the Rear Shaft Hinge into the hinge opening in the Rear Cover
arm, until the latch locks the Hinge onto the shaft.
4. Slide the Front Shaft Hinge into the hinge opening in the Front
Cover arm, until the latch locks the Hinge onto the shaft.
5. Use two screws to secure the two Cover Supports to the frame.
6. Reinstall the Rear Cover. ("Rear Cover Assembly" on page -140)
7. Open and close the Cover to make sure it opens and latches
correctly.
Rev.B
Chapter 4 Disassembly and Assembly
186