Epson EPL-N4000 Service Manual page 20

EPSON EPL-N4000/EPL-N4000+

graphics relative position coordinate mode 2 (GS 2 sarG)

GS command encode (GS n1; n2ecE, GSn1;n2ec{E)

stretch raster image compression 5 (GS n1; to;n6 srl)

noPGI mode in gray color space
MODIFIED ESCP2,FX


The emulation target was designed for Euro.
RECEIVE DATA SPOOLING, ELECTRONIC SORTING AND PS
FONT DOWNLOADING WERE ADDED FOR USE OF HDD


The following were added to the panel setting items.

Support Menu/HDD Format

Support Menu/Adobe PS 3 kit HDD Init


The following were added to the printer messages.

Invalid HDD

Adobe PS 3 kit Hard Disk full
DESIGNED FOR TYPE B OPTION LEVEL3


"D4" was added to MAIN System Type of Type-B I/F


The following were added to the Panel Setting items.

AUX Status Sheet to Test Menu

AUX Config to Aux Menu

Get IP address to Aux Menu

IP Byte to Aux Menu

SM Byte to Aux Menu
Rev.B

GW Byte to Aux Menu

NetWare to Aux Menu

Apple Talk to Aux Menu

NetBEUI to Aux Menu

AUX Init to Aux Menu
ADDED NETWORK PROTOCOL


ENPC(EPSON Network Peripheral Control Protocol) protocol was
added to the built-in network.


Epson Net Web Manager, WinAssist and MacAssist were added to
the utilities packed with the product.
DESIGNED FOR PANEL SETTING BY WEB


All panel setting items were designed for setting from Web
(EPSONNet WebAssist)


EPSON Remote Control Panel was deleted from the utilities packed
with the product.
MODIFIED PANEL SETTING
The following panel setting items other than the above were modified.


The order of Test Menu was changed.


It was designed that Binding would also appear in the Printing Menu
when the finisher was installed.


MP Mode was added to the Tray Menu


Setup Menu/Auto Eject Page


LANG=SUOMI in the Setup Menu was changed to KIELI=SUOMI.
CHAPTER 1 Product Description
6