Orientation Of The Feeding Roller; Adjusting The Pressure Of The Separation Roller - Canon NP6330 Service Manual

3

Orientation of the Feeding Roller

When installing the feeding roller
on the feeding roller is at the rear of the copier.
4

Adjusting the Pressure of the Separation Roller

If double feeding or pick-up failure occurs during pick-up, adjust the position of the
pressure spring of the separation roller:
If double feeding occurs, move the spring toward
If pick-up failure occurs, move the spring toward
Feeding roller
Separation roller
COPYRIGHT © 1997 CANON INC.
to the pick-up assembly, be sure that the gear
Figure 11-239
Figure 11-240
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
(front of copier)
.
.
Locking lever
Pressure spring
11-35