Removing The Pick-Up Assembly - Canon NP6330 Service Manual

2. Removing the Pick-Up Assembly

1) Slide out the paper deck.
Note:
• Do not try to remove the pick-up assembly without sliding out the paper deck from
the pedestal; the lifter will make the removal of the pick-up assembly impossible.
• Do not slide out the paper deck too far toward the front; doing so would cause the
pedestal to tilt to the front when the pick-up assembly is removed
2) Remove the right cover.
3) Push is the leaf spring
4) Remove the screw
5) Disconnect the four connectors
COPYRIGHT © 1997 CANON INC.
, and release the Vertical path roller 3 unit
Figure 8-626
, then remove the stop plate.
.
Figure 8-627
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 8 PAPER DECK PEDESTAL
.
8-29