Canon NP6330 Service Manual page 196

CHAPTER 5 PICK-UP/FEEDING SYSTEM
4) Disconnect the connector
the pick-up roller unit
Reference:
Whenever installing the feeding roller
the gear attached to the feeding roller is toward the rear of the copier.
5-50
and the stop ring
and the feeding roller
Figure 5-709
Figure 5-710
COPYRIGHT © 1997 CANON INC.
of the feeding roller; then, pull out
at the same time.
to the pick-up assembly, be sure so that
(front of copier)
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)