Position Of The Developing Assembly Magnetic Seal; After Replacing The Drum Unit - Canon NP6330 Service Manual

7

Position of the Developing Assembly Magnetic Seal

Attach the magnetic seal firmly in contact with the opening shown in Figure 11-234.
Be sure that the correct magnetic seal is used; different seals are used for the front
and the rear.
8

After Replacing the Drum unit

Whenever you have replaced the drum unit, record the date and the current counter
reading on the label which comes with the drum unit, and attach the label to the front
over; then, perform the image adjustment basic procedure.
COPYRIGHT © 1997 CANON INC.
Magnetic seal
Opening (butting reference)
Figure 11-234
Rear
Figure 11-235
counter
date
compteur
date Datum
Figure 11-236
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
Front
notes
Zähler
note Notiz
11-33