Orientation Of The Scanning Lamp - Canon NP6330 Service Manual

CHAPTER 4 IMAGE FORMATION SYSTEM
4) Turn the flat-blade screwdriver in the direction of arrow
in the direction of arrow
Note:
1. If the scanning lamp is hot, wait until it has cooled.
2. Do not leave fingerprints on the scanning lamp.
3. If the surface of the scanning lamp is soiled, dry wipe it.

2. Orientation of the Scanning Lamp

Orient the scanning lamp
of the arrow (direction in which the mirror mount moves in reverse); for lengthwise
orientation, keep the logo mark facing the front.
Note:
When installing the scanning lamp, avoid touching its surface.
4-26
, and remove the scanning lamp
Figure 4-302
so that the protrusion in its middle points in the direction
Mirror mount reverse direction
Figure 4-303
COPYRIGHT © 1997 CANON INC.
to open the electrode plate
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.