CHAPTER 5 PICK-UP/FEEDING SYSTEM
7) Disconnect the three connectors
8) Remove the seven screws
Note:
Be sure to hold the pick-up assembly side plates whenever you are installing or
removing the pick-up assembly.
3. Removing the Pick-Up Roller
1) Remove the pick-up assembly.
2) Remove the stop ring (plastic)
collar.
5-48
, and remove the pick-up assembly
Figure 5-705
, and pull out the pick-up roller
Figure 5-706
COPYRIGHT © 1997 CANON INC.
of the pick-up assembly.
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.
together with its