Removing The Blank Exposure Lamp - Canon NP6330 Service Manual

CHAPTER 4 IMAGE FORMATION SYSTEM

2. Removing the Blank Exposure Lamp

1) Remove the blank exposure lamp assembly.
2) Remove the two screws
upper plate .
3) Disconnect the two connectors
plate .
4) Remove the three screws
4-30
, and the connector
Figure 4-310
, and remove the blank exposure assembly upper
Figure 4-311
, and remove the blank exposure lamp
Figure 4-312
COPYRIGHT © 1997 CANON INC.
; then, turn over the blank exposure
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.