Canon NP6330 Service Manual page 169

3) The set-back rollers 1 and 2 are rotated in reverse. The copy paper is then stopped
when the distance between its leading edge and the set-back roller 1 is 8 mm.
PS12
4) The second copy paper is moved to the lower feeding assembly.
PS12
5) The leading edge of the second copy paper is made to arch by the set-back roller 1.
PS12
COPYRIGHT © 1997 CANON INC.
8mm
Set-back roller 1
Figure 5-509
2nd copy paper
Figure 5-510
Set-back roller 1
Figure 5-511
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
5-23