Canon NP6330 Service Manual page 323

CHAPTER 9 INSTALLATION
No.
9 Open the front cover, and open the
delivery assembly.
10 Push up the spacer (one each at front
and rear) of the fixing roller in the
direction of the arrow until a click is
heard.
11 Remove the spacer.
• You will not be using the spacer.
12
Close the delivery assembly.
9-4
Work
COPYRIGHT © 1997 CANON INC.
Checks/remarks
Spacer
Note:
When removing the spacer, pay
attention to the leaf spring of the
fixing unit and the separation claw of
the delivery assembly.
Leaf spring
Spacer (rear)
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
Spacer