5) While paying attention to the spring at the rear of the feeding assembly, slide out the
feeding assembly
2. Removing the Feeding Belt
1) Remove the feeding assembly.
2) Remove the transfer charging assembly.
3) Remove the two screws
fastons
.
COPYRIGHT © 1997 CANON INC.
to the front.
Figure 5-736
, and remove the support
Figure 5-737
Figure 5-738
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
, bushing
, gear
, and four
5-63